Off Road Accessories Parts
Help and Support
Butch's Speed Shop Logo Butchs Speed Shop Home Butchs EBay Store Off Road Events Las Vegas Off Road Showroom
(Your shopping cart is empty)



We Ship Worldwide Accept Major Credit Cards


You are here: Home > Brake and Clutch
Choose a sub category:
Complete Pedal Packages Brake Line Clamps Pedals & Accessories
Disc Brake Kits
When building out and constructing our off road vehicle, sometimes we’re so preoccupied with speed, that the dune buggy brakes can get overlooked. But as any experienced off road racer knows all too well, the brake system is as vital a component as any in the vehicle. Without a fully functional and optimal brake system, you’ll find yourself spinning out of tight turns and struggling to make quick adjustments during the race.

With our vast selection of brake parts, including brake line clamps, brake cables, brackets and basically all the necessary components for installing a brake system, you can’t go wrong. If you need any help or advice when purchasing dune buggy brakes, then our knowledgeable service team is only a phone call away and can be reached at 702-247-1277. We look forward to hearing from you!
Sort By:
Page of 3
C-Washer Clip for Handbrake Cable Retaining Springs Bleeder Valve 6mm
Our Price: 0.19
Call Us For Pricing And Availability
Our Price: 0.49
Call Us For Pricing And Availability
Our Price: 1.09
Call Us For Pricing And Availability
Retaining Springs
E-brake Pin on Rear Brake Shoes,
HD Throwout Bearing Retaining Spring
Brake Bleeder Screw (Bleeder Valve), 6 x 28mm fits virtually all VWs.
Wing Nut Adjuster 7mm 5/16" Jam Nut for Slave Stainless Steel Clamp for Brake Line
Our Price: 1.19
Call Us For Pricing And Availability
Our Price: 1.99
Call Us For Pricing And Availability
Our Price: 2.99
Call Us For Pricing And Availability
Wing Nut Adjuster 7mm CNC 5/16" Jam Nut for Slave Empi Stainless Steel Clamp for Brake Line
1966-79 All Models
5/16"-24 Hex Jam nut
These are polished stainless steel clamps that are formed to fit 3/16" or 1/4" line.
Clutch Cable Shortening Kit Universal Throttle Cable Kit, 15Ft. Clutch Cable 3168mm
Our Price: 3.95
Call Us For Pricing And Availability
Our Price: 5.99
Call Us For Pricing And Availability
Our Price: 5.99
Call Us For Pricing And Availability
Empi 15 foot universal throttle cable
Shortened. modified. or custom chassis usually require control cables to be adjusted to proper length.
Universal cable with two ends already installed.
Clutch Cable, 3168mm, 1967-71 Type 2
Brake Cable Brass Bleeder Adapter Slave Cylinder Bleeder Screw
Our Price: 6.95
Call Us For Pricing And Availability
Our Price: 6.99
Call Us For Pricing And Availability
Our Price: 6.99
Call Us For Pricing And Availability
CNC Brass Bleeder Adapter CNC Slave Cylinder Bleeder Screw
Shortened. modified. or custom chassis usually require control cables to be adjusted to proper length.
1/8 NPT brass fitting for CNC1304 bleeder screw or CNC 1470 brake pressure gauge.
Bleeder screw for slave cylinder, cutting brake, or caliper.
Half Round 5/16-24 Nut for Slave Hand Brake Cable 2960mm Replacement Bolt, Lock Washer, & Foot for Adjustable Pedal Mount Plate
Our Price: 6.99
Call Us For Pricing And Availability
Our Price: 7.69
Call Us For Pricing And Availability
Our Price: 7.99
Call Us For Pricing And Availability
CNC Half Round 5/16-24 Nut for Slave
Replacement Half Round Nut
1972-79 Type 2 (IRS).
The Series 122 hydraulic pedal package does not include a throttle pedal.
Boot for Master Cylinder Hand Brake Cable 1685mm Bolt-On Bowden Bracket
Our Price: 7.99
Call Us For Pricing And Availability
Our Price: 8.59
Call Us For Pricing And Availability
Our Price: 8.99
Call Us For Pricing And Availability
CNC Boot for Master Cylinder Bolt-On Bowden Bracket
Boot for square reservoir CNC master cylinder.
1958-65 Type 1
Bolt-on bowden bracket, late bus. Each
Boot for Cutting Brake Celvis & Pin for Single Handle Cutting Brake 3/8-24 Thread to Metric Thread Bubble Flare
Our Price: 8.99
Call Us For Pricing And Availability
Our Price: 8.99
Call Us For Pricing And Availability
Our Price: 8.99
Call Us For Pricing And Availability
CNC Boot for Cutting Brake CNC Celvis & Pin for Single Handle Cutting Brake
Replacement Total-seal rubber boot for CNC cutting brakes.
Clevis with pin for turning brakes, hand brakes and master cylinders.
Brake Line Fitting
3/16" American to Metric Coupler Clear Cable Sleeve 307mm Large Pedal Pad
Our Price: 8.99
Call Us For Pricing And Availability
Our Price: 9.50
Call Us For Pricing And Availability
Our Price: 9.99
Call Us For Pricing And Availability
Large Pedal Pad
CNC offers these handy couplers .
Clutch Bowden Tube (Clutch Cable Sleeve), 1972-73 Beetle and Ghia,
Replaces CNC rubber pedal pads on all large foot pedals.
Rubber Gasket for Easy Fill Cover Round Reservoir Gasket Master Cylinder Clevis & Pin
Our Price: 9.99
Call Us For Pricing And Availability
Our Price: 9.99
Call Us For Pricing And Availability
Our Price: 9.99
Call Us For Pricing And Availability
CNC Rubber Gasket for Easy Fill Cover CNC Round Reservoir Gasket CNC Master Cylinder Clevis & Pin
Fits all CNC rectangular reservoirs.
Reservoir gasket for round reservoir CNC master cylinder.
Anodized aluminum clevises.
5" Fixed Mounting Rod for Slave Cylinder Rear Brake Hose 235mm Brake Fluid Reservoir
Our Price: 9.99
Call Us For Pricing And Availability
Our Price: 10.19
Call Us For Pricing And Availability
Our Price: 10.89
Call Us For Pricing And Availability
CNC 5" Fixed Mounting Rod for Slave Cylinder
5" Fixed Mounting Rod for Slave Cylinder
IRS Type 1 and Type 3, 235mm
This plastic reservoir simply screws into the master cylinder.